Quick view sku: M1-TRG-NOS-SA Original Springfield Armory Trigger Assembly w/Sears NOS MSRP: Now: Compare Quick view sku: WIND-SA-O2617 M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use MSRP: Now: Compare Quick view sku: NM2A-SBASE-GRY M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey MSRP: Now: Compare Quick view sku: NEW-NM-WIND-GRY National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey MSRP: Now: Compare Quick view sku: LB-FLAT-SA-NOS M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-65SA-J1B-NOS M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: WRA-BGDE-33-A06 M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use MSRP: Now: Compare Quick view sku: T2-LBASSY-CPT-ORIG M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA MSRP: Now: Compare Quick view sku: M1-TRGPIN-NOS-S14 M1 Garand Trigger Pin USGI New Old Stock (NOS) MSRP: Now: Compare Quick view sku: TRG-SA-W2-NOS M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FERR-SCREW-NOS-J01 M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SGLSLOT-SA-J1417 M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: SAFE-U-NOS M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-PINION-SA-J08 M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use MSRP: Now: Compare Quick view sku: OPCATCH-SA-USED-O1016 M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use MSRP: Now: Compare Quick view sku: NM-WIND-BME-NOS M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NM-SB-SA-NOS M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: LB-FLAT-NOS-N1716 M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-IHC-AS-NOS M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SCRW-FRNTSIGHT-SA M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FRSIGHT-IHC-NOS-JN20 M1 Garand Front Sight IHC Internation Harvester NOS MSRP: Now: Compare Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: WIND-SA-O2617 M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use MSRP: Now: Compare Quick view sku: NM2A-SBASE-GRY M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey MSRP: Now: Compare Quick view sku: NEW-NM-WIND-GRY National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey MSRP: Now: Compare Quick view sku: LB-FLAT-SA-NOS M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-65SA-J1B-NOS M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: WRA-BGDE-33-A06 M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use MSRP: Now: Compare Quick view sku: T2-LBASSY-CPT-ORIG M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA MSRP: Now: Compare Quick view sku: M1-TRGPIN-NOS-S14 M1 Garand Trigger Pin USGI New Old Stock (NOS) MSRP: Now: Compare Quick view sku: TRG-SA-W2-NOS M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FERR-SCREW-NOS-J01 M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SGLSLOT-SA-J1417 M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: SAFE-U-NOS M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-PINION-SA-J08 M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use MSRP: Now: Compare Quick view sku: OPCATCH-SA-USED-O1016 M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use MSRP: Now: Compare Quick view sku: NM-WIND-BME-NOS M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NM-SB-SA-NOS M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: LB-FLAT-NOS-N1716 M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-IHC-AS-NOS M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SCRW-FRNTSIGHT-SA M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FRSIGHT-IHC-NOS-JN20 M1 Garand Front Sight IHC Internation Harvester NOS MSRP: Now: Compare Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: NM2A-SBASE-GRY M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey MSRP: Now: Compare Quick view sku: NEW-NM-WIND-GRY National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey MSRP: Now: Compare Quick view sku: LB-FLAT-SA-NOS M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-65SA-J1B-NOS M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: WRA-BGDE-33-A06 M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use MSRP: Now: Compare Quick view sku: T2-LBASSY-CPT-ORIG M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA MSRP: Now: Compare Quick view sku: M1-TRGPIN-NOS-S14 M1 Garand Trigger Pin USGI New Old Stock (NOS) MSRP: Now: Compare Quick view sku: TRG-SA-W2-NOS M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FERR-SCREW-NOS-J01 M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SGLSLOT-SA-J1417 M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: SAFE-U-NOS M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-PINION-SA-J08 M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use MSRP: Now: Compare Quick view sku: OPCATCH-SA-USED-O1016 M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use MSRP: Now: Compare Quick view sku: NM-WIND-BME-NOS M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NM-SB-SA-NOS M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: LB-FLAT-NOS-N1716 M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-IHC-AS-NOS M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SCRW-FRNTSIGHT-SA M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FRSIGHT-IHC-NOS-JN20 M1 Garand Front Sight IHC Internation Harvester NOS MSRP: Now: Compare Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: NEW-NM-WIND-GRY National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey MSRP: Now: Compare Quick view sku: LB-FLAT-SA-NOS M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-65SA-J1B-NOS M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: WRA-BGDE-33-A06 M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use MSRP: Now: Compare Quick view sku: T2-LBASSY-CPT-ORIG M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA MSRP: Now: Compare Quick view sku: M1-TRGPIN-NOS-S14 M1 Garand Trigger Pin USGI New Old Stock (NOS) MSRP: Now: Compare Quick view sku: TRG-SA-W2-NOS M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FERR-SCREW-NOS-J01 M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SGLSLOT-SA-J1417 M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: SAFE-U-NOS M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-PINION-SA-J08 M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use MSRP: Now: Compare Quick view sku: OPCATCH-SA-USED-O1016 M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use MSRP: Now: Compare Quick view sku: NM-WIND-BME-NOS M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NM-SB-SA-NOS M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: LB-FLAT-NOS-N1716 M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-IHC-AS-NOS M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SCRW-FRNTSIGHT-SA M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FRSIGHT-IHC-NOS-JN20 M1 Garand Front Sight IHC Internation Harvester NOS MSRP: Now: Compare Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: LB-FLAT-SA-NOS M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-65SA-J1B-NOS M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: WRA-BGDE-33-A06 M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use MSRP: Now: Compare Quick view sku: T2-LBASSY-CPT-ORIG M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA MSRP: Now: Compare Quick view sku: M1-TRGPIN-NOS-S14 M1 Garand Trigger Pin USGI New Old Stock (NOS) MSRP: Now: Compare Quick view sku: TRG-SA-W2-NOS M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FERR-SCREW-NOS-J01 M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SGLSLOT-SA-J1417 M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: SAFE-U-NOS M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-PINION-SA-J08 M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use MSRP: Now: Compare Quick view sku: OPCATCH-SA-USED-O1016 M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use MSRP: Now: Compare Quick view sku: NM-WIND-BME-NOS M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NM-SB-SA-NOS M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: LB-FLAT-NOS-N1716 M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-IHC-AS-NOS M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SCRW-FRNTSIGHT-SA M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FRSIGHT-IHC-NOS-JN20 M1 Garand Front Sight IHC Internation Harvester NOS MSRP: Now: Compare Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: BLT-65SA-J1B-NOS M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: WRA-BGDE-33-A06 M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use MSRP: Now: Compare Quick view sku: T2-LBASSY-CPT-ORIG M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA MSRP: Now: Compare Quick view sku: M1-TRGPIN-NOS-S14 M1 Garand Trigger Pin USGI New Old Stock (NOS) MSRP: Now: Compare Quick view sku: TRG-SA-W2-NOS M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FERR-SCREW-NOS-J01 M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SGLSLOT-SA-J1417 M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: SAFE-U-NOS M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-PINION-SA-J08 M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use MSRP: Now: Compare Quick view sku: OPCATCH-SA-USED-O1016 M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use MSRP: Now: Compare Quick view sku: NM-WIND-BME-NOS M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NM-SB-SA-NOS M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: LB-FLAT-NOS-N1716 M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-IHC-AS-NOS M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SCRW-FRNTSIGHT-SA M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FRSIGHT-IHC-NOS-JN20 M1 Garand Front Sight IHC Internation Harvester NOS MSRP: Now: Compare Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: WRA-BGDE-33-A06 M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use MSRP: Now: Compare Quick view sku: T2-LBASSY-CPT-ORIG M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA MSRP: Now: Compare Quick view sku: M1-TRGPIN-NOS-S14 M1 Garand Trigger Pin USGI New Old Stock (NOS) MSRP: Now: Compare Quick view sku: TRG-SA-W2-NOS M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FERR-SCREW-NOS-J01 M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SGLSLOT-SA-J1417 M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: SAFE-U-NOS M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-PINION-SA-J08 M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use MSRP: Now: Compare Quick view sku: OPCATCH-SA-USED-O1016 M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use MSRP: Now: Compare Quick view sku: NM-WIND-BME-NOS M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NM-SB-SA-NOS M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: LB-FLAT-NOS-N1716 M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-IHC-AS-NOS M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SCRW-FRNTSIGHT-SA M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FRSIGHT-IHC-NOS-JN20 M1 Garand Front Sight IHC Internation Harvester NOS MSRP: Now: Compare Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: T2-LBASSY-CPT-ORIG M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA MSRP: Now: Compare Quick view sku: M1-TRGPIN-NOS-S14 M1 Garand Trigger Pin USGI New Old Stock (NOS) MSRP: Now: Compare Quick view sku: TRG-SA-W2-NOS M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FERR-SCREW-NOS-J01 M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SGLSLOT-SA-J1417 M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: SAFE-U-NOS M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-PINION-SA-J08 M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use MSRP: Now: Compare Quick view sku: OPCATCH-SA-USED-O1016 M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use MSRP: Now: Compare Quick view sku: NM-WIND-BME-NOS M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NM-SB-SA-NOS M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: LB-FLAT-NOS-N1716 M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-IHC-AS-NOS M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SCRW-FRNTSIGHT-SA M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FRSIGHT-IHC-NOS-JN20 M1 Garand Front Sight IHC Internation Harvester NOS MSRP: Now: Compare Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: M1-TRGPIN-NOS-S14 M1 Garand Trigger Pin USGI New Old Stock (NOS) MSRP: Now: Compare Quick view sku: TRG-SA-W2-NOS M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FERR-SCREW-NOS-J01 M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SGLSLOT-SA-J1417 M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: SAFE-U-NOS M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-PINION-SA-J08 M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use MSRP: Now: Compare Quick view sku: OPCATCH-SA-USED-O1016 M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use MSRP: Now: Compare Quick view sku: NM-WIND-BME-NOS M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NM-SB-SA-NOS M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: LB-FLAT-NOS-N1716 M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-IHC-AS-NOS M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SCRW-FRNTSIGHT-SA M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FRSIGHT-IHC-NOS-JN20 M1 Garand Front Sight IHC Internation Harvester NOS MSRP: Now: Compare Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: TRG-SA-W2-NOS M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FERR-SCREW-NOS-J01 M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SGLSLOT-SA-J1417 M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: SAFE-U-NOS M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-PINION-SA-J08 M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use MSRP: Now: Compare Quick view sku: OPCATCH-SA-USED-O1016 M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use MSRP: Now: Compare Quick view sku: NM-WIND-BME-NOS M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NM-SB-SA-NOS M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: LB-FLAT-NOS-N1716 M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-IHC-AS-NOS M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SCRW-FRNTSIGHT-SA M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FRSIGHT-IHC-NOS-JN20 M1 Garand Front Sight IHC Internation Harvester NOS MSRP: Now: Compare Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: M1-FERR-SCREW-NOS-J01 M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SGLSLOT-SA-J1417 M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: SAFE-U-NOS M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-PINION-SA-J08 M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use MSRP: Now: Compare Quick view sku: OPCATCH-SA-USED-O1016 M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use MSRP: Now: Compare Quick view sku: NM-WIND-BME-NOS M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NM-SB-SA-NOS M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: LB-FLAT-NOS-N1716 M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-IHC-AS-NOS M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SCRW-FRNTSIGHT-SA M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FRSIGHT-IHC-NOS-JN20 M1 Garand Front Sight IHC Internation Harvester NOS MSRP: Now: Compare Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: NOS-SGLSLOT-SA-J1417 M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: SAFE-U-NOS M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-PINION-SA-J08 M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use MSRP: Now: Compare Quick view sku: OPCATCH-SA-USED-O1016 M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use MSRP: Now: Compare Quick view sku: NM-WIND-BME-NOS M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NM-SB-SA-NOS M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: LB-FLAT-NOS-N1716 M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-IHC-AS-NOS M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SCRW-FRNTSIGHT-SA M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FRSIGHT-IHC-NOS-JN20 M1 Garand Front Sight IHC Internation Harvester NOS MSRP: Now: Compare Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: SAFE-U-NOS M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-PINION-SA-J08 M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use MSRP: Now: Compare Quick view sku: OPCATCH-SA-USED-O1016 M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use MSRP: Now: Compare Quick view sku: NM-WIND-BME-NOS M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NM-SB-SA-NOS M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: LB-FLAT-NOS-N1716 M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-IHC-AS-NOS M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SCRW-FRNTSIGHT-SA M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FRSIGHT-IHC-NOS-JN20 M1 Garand Front Sight IHC Internation Harvester NOS MSRP: Now: Compare Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: M1-PINION-SA-J08 M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use MSRP: Now: Compare Quick view sku: OPCATCH-SA-USED-O1016 M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use MSRP: Now: Compare Quick view sku: NM-WIND-BME-NOS M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NM-SB-SA-NOS M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: LB-FLAT-NOS-N1716 M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-IHC-AS-NOS M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SCRW-FRNTSIGHT-SA M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FRSIGHT-IHC-NOS-JN20 M1 Garand Front Sight IHC Internation Harvester NOS MSRP: Now: Compare Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: OPCATCH-SA-USED-O1016 M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use MSRP: Now: Compare Quick view sku: NM-WIND-BME-NOS M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NM-SB-SA-NOS M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: LB-FLAT-NOS-N1716 M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-IHC-AS-NOS M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SCRW-FRNTSIGHT-SA M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FRSIGHT-IHC-NOS-JN20 M1 Garand Front Sight IHC Internation Harvester NOS MSRP: Now: Compare Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: NM-WIND-BME-NOS M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NM-SB-SA-NOS M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: LB-FLAT-NOS-N1716 M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-IHC-AS-NOS M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SCRW-FRNTSIGHT-SA M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FRSIGHT-IHC-NOS-JN20 M1 Garand Front Sight IHC Internation Harvester NOS MSRP: Now: Compare Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: NM-SB-SA-NOS M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: LB-FLAT-NOS-N1716 M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-IHC-AS-NOS M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SCRW-FRNTSIGHT-SA M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FRSIGHT-IHC-NOS-JN20 M1 Garand Front Sight IHC Internation Harvester NOS MSRP: Now: Compare Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: LB-FLAT-NOS-N1716 M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: BLT-IHC-AS-NOS M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SCRW-FRNTSIGHT-SA M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FRSIGHT-IHC-NOS-JN20 M1 Garand Front Sight IHC Internation Harvester NOS MSRP: Now: Compare Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: BLT-IHC-AS-NOS M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: NOS-SCRW-FRNTSIGHT-SA M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FRSIGHT-IHC-NOS-JN20 M1 Garand Front Sight IHC Internation Harvester NOS MSRP: Now: Compare Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: NOS-SCRW-FRNTSIGHT-SA M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FRSIGHT-IHC-NOS-JN20 M1 Garand Front Sight IHC Internation Harvester NOS MSRP: Now: Compare Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: M1-FRSIGHT-IHC-NOS-JN20 M1 Garand Front Sight IHC Internation Harvester NOS MSRP: Now: Compare Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: M1-SIGHT-SA-NOS-O9 M1 Garand Front Sight 5/8" SA Springfield USGI NOS MSRP: Now: Compare Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: NOS-SAFOLARM44 M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: M1-FOLARMPIN-NG-NOS M1 Garand Follower Arm Pin USGI NOS Without Groove MSRP: Now: Compare Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: FOLARMPIN-WG-NOS M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: M1-CL-SPRNG-NOS-S07 M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: M1-CLIPSPRING-NOS M1 Garand Clip Ejector Spring USGI <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: M1-BSRW-SHRT-NOS-J01 M1 Garand Butt Plate Screw Short USGI also fits 1903, M14 and M1 Carbine <br>UNISSUED New Old Stock (NOS) MSRP: Now: Compare Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: M1-BLT-65-Z4B-NOS-N12 M1 Garand Bolt Springfield 6528287-SA Z-4-B<br>UNISSUED New Old Stock (NOS) Complete MSRP: Now: Compare Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: CLIP-5RD-1903WWII 5rd 1903 Springfield Stripper Clips Original WWII MSRP: Now: Compare Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: 1903-FRNT-TGRD-10PK 1903 Front Trigger Guard Screws Orig 10ea Packet USGI MSRP: Now: Compare Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: NM-NOS-SA-WIND-CPP National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A Springfield Armory 1960s NOS CPP Coded MSRP: Now: Compare Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: FLUSHNUT-836-M20 M1 Garand Flush Nut Rear Sight 8-36 NF Thread for LONG Pinion Use - NEW - Replacement MSRP: Now: Compare Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view sku: CLTCH-SQ-USGI M1 Garand Clip Latch Square End Springfield SA Late '44 on use HRA Also MSRP: Now: Compare Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view Original Springfield Armory Trigger Assembly w/Sears NOS Original New Old Stock "NOS" Trigger Assemblies from Springfield Armory. All "new" from their original packing. Open package in picture are the parts, select quantity desired when adding to cart. Click on image for larger view of opened package, you... MSRP: Now: Compare Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand Springfield Windage Knob Cap SA marked 6.08 - 6.09 mil SA use M1 Garand Springfield "SA" marked windage knob. Excellent original condition. Observed on late 6.08 to 6.09 mil ser number range rifles. Note that these have open letters, small arrow heads and thin lines. One pictured available. Click on... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand M14 M1A National Match Rear Sight Base NM/2A for Hooded Apertures <br>New - Grey NOW IN STOCK!! National Match Rear Sight Base for M1 Garand M14 M1A . These are New production parts and marked NM/2A for use with Hooded NM Rear Sight Apertures. Standard non-hooded NM Apertures can also be used with these bases. Bases are threaded for... MSRP: Now: Compare Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view National Match Rear Sight Windage Knob NM 1/2 MOA for M1 Garand M14 M1A <br>New - Grey National Match Rear Sight Windage Knob M1 Garand M14 M1A. These are New production for use with NM Sight Bases and threaded for 1/2 MOA so you must use with appropriate 1/2 MOA threaded NM base also (and we have those too!). Sold individually so select... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand Lower Band Flat Top Springfield SA USGI NOS<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Springfield Armory packing. Post war spares packed up in 1960's. Flat lower bands were used by... MSRP: Now: Compare Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand Bolt Springfield 6528287-SA J-1-B 4.20-4.22 use<br>UNISSUED New Old Stock (NOS) Complete M1 Garand Bolt Springfield 6528287-SA Heat Lot J-1-B. Bolts are COMPLETE Unissued New Old Stock - NOS. Bolt is appropriate for post WWII rifles in the 4.2 to 4.22 mil serial number range and later. Several are available and all unissued in wrap as... MSRP: Now: Compare Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand Winchester Milled Bullet Guide Wide Slot with Punch and "33" Late WIN13 use Late WIN13 Winchester Milled bullet guide with "33" stamp, also referred to a an "8" stamp as they are often hard to read on part. Part has little finish remaining. Has wide slot and "punch" mark characteristic of WRA parts... MSRP: Now: Compare Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand Type II Lock Bar Rear Sight Assembly Complete WWII Early Original Springfield SA Complete Original M1 Garand Springfield Type II Lock Bar Rear Sight Assembly. Complete with knurling on elevation cap and windage knob, rounded Type II locking bar and early single rib sight cover spring. Original WWII sight assembly. Appropriate for... MSRP: Now: Compare Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand Trigger Pin USGI New Old Stock (NOS) M1 Garand USGI Trigger Pins. Parts are USGI and New Old Stock (NOS). Several available so select quantity desired when adding to cart. Click on image for larger view of parts available. Select "Parts-Clips (NOT Ammo)" to get proper shipping... MSRP: Now: Compare Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand Trigger Assembly w/Sear Springfield SA WWII <br>UNISSUED New Old Stock (NOS) Unissued New Old Stock (NOS) WWII M1 Garand Trigger Assembly w/Sear Springfield SA. Still in the grease. These are unissued WWII production with casting numbers on side of trigger, characteristic of WWII production from Springfield. Only two pictured... MSRP: Now: Compare Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand Stock Ferrule Swivel Screw USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Stock Ferrule Screws. All are USGI and "New Old Stock" (NOS). Select quantity desired when adding to cart. Click on image for a larger view of sample from parts available. Note most have grease on them still. MSRP: Now: Compare Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand Single Slot Gas Screw Springfield SA WWII<br>Also for NM Use <br>UNISSUED New Old Stock (NOS) Original unissued Springfield WWII M1 Garand Single Slot Gas Screws. These have never been used and are New Old Stock (NOS), a rarity for Single Slot Screws! Single Slot Gas Screws are also perfect for National Match Rifles (we also offer a much cheaper... MSRP: Now: Compare Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand Safety Springfield U Coded 4.2mil on use Also IHC use <br>UNISSUED New Old Stock (NOS) M1 Garand U coded Safety. New Old Stock from original Springfield packaging dated Feb 1953. These were used on both Springfield and IHC production Rifles. Several available so select quantity desired when adding to cart. Pictures are of some of the... MSRP: Now: Compare Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand Rear Sight Pinion Assembly SA Marked 6.09 on use Rare Late Springfield Rear Sight Pinion Assembly marked SA. These were observed about the 6.09 mil ser# range and were parked with short threads on end and grooves only on center. A seldom seen part. One pictured available. Click on image for larger... MSRP: Now: Compare Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand Operating Rod Catch USGI Springfield SA Apr '41 on use M1 Garand Springfield USGI Operating Rod Catch Assembly. Springfield used this style of Op Rod Catch from approximately April 1941 until end of production with only minor pin color and staking variations. These are all used with most having been... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand M14 M1A National Match Rear Sight Windage Knob BME NM<br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Windage Knobs. These are UNISSUED original USGI parts from depot in original individual packing dated 1962 from Bruce Machine & Engineering (BME). NM BME marked and threaded for 1/2 MOA so you must use with... MSRP: Now: Compare Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand M14 M1A National Match Rear Sight Base NM Springfield SA <br>UNISSUED New Old Stock (NOS) M1 Garand M14 M1A National Match Rear Sight Bases. These are UNISSUED NOS original Springfield Armory USGI parts from depot in original individual packing. All are 1959-1962 vintage based on original boxes these came in. ( These are NOT Aftermarket like... MSRP: Now: Compare Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand Lower Band Flat Top USGI NOS Jun '43 on use<br>UNISSUED New Old Stock (NOS) ** These match perfectly with our Manganese Parc Metal Sets!! M1 Garand "Flat Top" Lower Band, NEW unissued condition, direct from original Depot packing. Post war spares packed up in 1960's. Flat lower bands were used by Springfield from... MSRP: Now: Compare Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand IHC Bolt D-6528287 IHC AS Coded International Harvester COMPLETE<br>4.51 - 4.65 Mil use<br>UNISSUED New Old Stock (NOS) New Old Stock (NOS) International Harvester M1 Garand Bolts. Marked D-6528287IHC with AS. These were observed on 4.51M - 4.65M serial number rifles. All available are UNISSUED and COMPLETE. We have only opened wrap to verify heat lot codes. Click on... MSRP: Now: Compare Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand Front Sight Screw Springfield SA Spring '43 on <br>UNISSUED New Old Stock (NOS) M1 Garand Front Sight Screws, New Old Stock (NOS). Smooth side and no recess. These were used by Springfield from Spring of 1943 through end of production. All available are NOS from original Depot packaging. Several available so select quantity desired... MSRP: Now: Compare Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand Front Sight IHC Internation Harvester NOS UNISSUED IHC Front sights for M1 Garand. New Old Stock, still in original cheesecloth! Several pictured available, select quantity desired when adding to cart. Click to view larger image of the actual parts available. Select "Parts-Clips NOT... MSRP: Now: Compare Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand Front Sight 5/8" SA Springfield USGI NOS Original Unissued Springfield M1 Garand 5/8" wide Front Sights. Unissued and direct from storage wrap. Several availailable so select quantity desired when adding to cart. Click on image for larger view of some of the ACTUAL sights available. All just... MSRP: Now: Compare Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand Follower Arm Springfield SA 1944 WWII <br>UNISSUED New Old Stock (NOS) Unissued Springfield Armory WWII M1 Garand Follower Arms. These Follower Arms are direct from their original 1944 dated Springfield Armory packaging, pictured, and are NOS (New Old Stock). WWII Springfield Follower Arms can be identified by the casting... MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand Follower Arm Pin USGI NOS Without Groove Springfield USGI Follower Arm Pin WITHOUT "groove" near head. USGI Original in NEW condition from the GI packaging. Several available, select quantity desired when adding to cart. MSRP: Now: Compare Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand Follower Arm Pin w/ Groove USGI Springfield <br>UNISSUED New Old Stock (NOS) Unissued Springfield Follower Arm Pins with "groove" near head. These were used by Springfield in both WWII and Post War Rifles. USGI SA Original in NEW condition from original packaging. Only a small amount left so select quantity desired when adding to... MSRP: Now: Compare Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.
Quick view M1 Garand Clip Latch Spring USGI <br>UNISSUED New Old Stock (NOS) M1 Garand Clip Latch Springs. All USGI and New Old Stock (NOS) in packaging. Click on image for larger view of sample from parts available. All are packed similar.